News

According to the ballistic principle, any sight near the interval, including mechanical sight, optical sight, internal red dot sight, laser, etc., is downward and has now exceeded the dispatchable plan. Under normal circumstances, this interval is not included in the dispatchable plan.

If the elastic point is always densely distributed and sideways within the normal operation range, the front and rear mirror ring pad metal pieces can be used for fine adjustment to correct the angle between the aiming axis and the applied object axis. According to the principle, only when the walking accuracy exceeds the range is the sight question, and when the walking accuracy is not in doubt, it is attributed to the condition of no calibration or out-of-range conditioning. The former can correct the elastic point according to the adjustment, if the latter is because it is too close or too far beyond the scope of application, the policy aiming interval can be changed and the appropriate aiming interval can be selected, while if it is the asymmetry between the aiming axis and the axis of the object to be applied (the included angle between the rail groove axis and the vertical line of the object to be applied is different when leaving the factory, therefore, different aiming devices may or may not be able to present this question) it is only necessary to fine-tune the front and rear mirror ring pad metal sheets to handle it.